References

Here you'll find a collection of pages you may find yourself referring to often for information.

• USB adapter info - Information about which USB/DB9 serial adapters work and which don't
• Basic injector starting points
• 1G memory module reset - How to reset the 1G memory module to chip defaults
• Enabling debug in V2 - How to enable additional debug messages in V2
• User-selectable in-dash boost gauge ranges
• Explanation of logged values - A bit of detail about each available value for logging in DSMLink
• Vista compatibility - A collection of things related to usage under Vista
• Settings to run 2G timing in a 1G
• Compensation values for a 2G hacked MAF
• Compensation values for an EVO8 MAF

• ECU wiring information - Pin outs and MFI circuit diagrams
• Buzzing out a 2G socket job - Check that your DIY socket job is actually right
• Socket part number - The preferred socket to use if you're going to do the socket job yourself
• Using a 1G NT EPROM ECU - Describes the issues and basic idea behind using a 1G NT EPROM ECU for running DSMLink
• Using a 4g61t Colt ECU - Describes using a 4g61t Colt ECU (MD131842, MD128615, others?)

• ECU tables and maps - A placeholder for now, it should contain information from our tuning guide someday
• Rev limiters - Basic information about various rev limiters
• 70 to 90 times vs. ET - A short collection of data posted by users regarding their 70-90 times and corresponding ET
• Common 2G coolant points
• Available ECU inputs - A list of available ECU inputs to which you can consider connecting an external sensor
• List of supported sensors - A list of sensors for which the DSMLink application includes display routines
• Basic MAF data - A list of MAF sensors commonly used in DSMs and their metering limits