v3hardreset
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
v3hardreset [2009/07/24 14:56] dmertz |
v3hardreset [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 17: | Line 17: | ||
| - If you initiate logging prior to performing the reset sequence, the logging will halt (the seconds counter will stop updating) the instant the reset happens. | - If you initiate logging prior to performing the reset sequence, the logging will halt (the seconds counter will stop updating) the instant the reset happens. | ||
| - With firmware v3.18.205 or earlier in the ECU, to be sure that the default settings are properly saved after executing the hard-boot procedure, use the PC app to modify any configuration value and Save to ECU before shutting off the ignition. | - With firmware v3.18.205 or earlier in the ECU, to be sure that the default settings are properly saved after executing the hard-boot procedure, use the PC app to modify any configuration value and Save to ECU before shutting off the ignition. | ||
| + | |||
v3hardreset.1248461810.txt.gz ยท Last modified: 2009/07/24 14:56 by dmertz
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
