ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>ECMLink (V3) Laptop Application Changelog</h1> <div class="level1"> <p> <a href="http://www.ecmtuning.com/downloads.php" class="urlextern" title="http://www.ecmtuning.com/downloads.php" rel="nofollow">Downloads page</a> </p> </div> <h2>3.19.49 (9/17/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added support for logging LoadFactor rather than factory load index to EVO1-3 ECUs</li> <li class="level1"> Updated support for EVO1-3 record structures to work with new extended timing and fuel tables</li> <li class="level1"> Added new buttons to bottom of graph display for quicker access to embedded ECU Config and Direct Access data while viewing datalogs</li> <li class="level1"> Fixed bogus error message when trying to run dial-in helpers under MacOS without first having the ECU Config tab open.</li> </ul> </div> <h2>3.19.40 (9/10/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed up/down arrow issue with ALS timing field</li> <li class="level1"> Fixed RPM indices on MAFClamp table (they now show the appropriate RPM indices based on ECU capabilities)</li> <li class="level1"> Increased selection contrast on SD VE table to match direct access</li> <li class="level1"> Expanded help docs related to IdleAir clamp function</li> <li class="level1"> Added support for new "disable MAF Comp while running in SD mode" checkbox (requires matching <a href="http://www.ecmtuning.com/apps/firmwareupgrade" class="urlextern" title="http://www.ecmtuning.com/apps/firmwareupgrade" rel="nofollow">firmware upgrade</a> to access this function)</li> <li class="level1"> Changed Java VM memory options to allow for more simultaneous large files to be opened</li> <li class="level1"> Changed default (bundled) Java VM version. To get this, however, you must install a "full" release. The "update" does not include a bundled JVM. This does not fix any known issues, so it's not really that critical. </li> </ul> </div> <h2>3.19.20 (8/22/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added fast idle ISC tables for EVO1-3 direct access</li> <li class="level1"> Display an appropriate error when we get no response from reflash operation</li> <li class="level1"> Fixed 2 bugs related to real-time changes while datalogging. You should be able to use the instant "save as changes are made" option while logging.</li> <li class="level1"> Fixed bug related to optimized save of small changes to large tables that was actually dropping updates at the end of the block.</li> </ul> </div> <h2>3.19.6 (8/7/2009)</h2> <div class="level2"> <ul> <li class="level1"> Increased contrast on selection highlighting with direct access tables</li> </ul> </div> <h2>3.19.3 (8/3/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added logic to speed up large table updates (like the speed density table)</li> <li class="level1"> Corrected spelling of Celsius <img src="/wiki/lib/images/smileys/icon_eek.gif" class="icon" alt="8-O" /></li> <li class="level1"> Added more EVO1-3 support functions, including speed density</li> <li class="level1"> Added experimental "save to ECU as changes are made" button. USE WITH CARE! This can act flaky if you are making changes while datalogging at the same time. We'll either fix that behavior or remove this function, depending on the level of interest and testing results.</li> </ul> </div> <h2>3.18.239 (7/15/2009)</h2> <div class="level2"> <ul> <li class="level1"> Updated linear wideband property names to indicate lambda instead of boost</li> <li class="level1"> Enabled "raw" and "hex" views to direct access tables</li> <li class="level1"> First release of EVO1-3 support added to application</li> </ul> </div> <h2>3.18.230 (7/6/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added support for the <a href="http://www.omnipowerusa.com/product.asp?P_ID=158" class="urlextern" title="http://www.omnipowerusa.com/product.asp?P_ID=158" rel="nofollow">Omni Power</a> 3 and 4-bar sensors. These can be datalogged, used for speed density operation or used for MAFClamp functions.</li> </ul> </div> <h2>3.18.205 (6/13/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added initial speed density documentation</li> <li class="level1"> Corrected glitch in AEMWB Gauge R1 mapping at 0.62v and 4.52v</li> </ul> </div> <h2>3.18.196 (6/5/2009)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug in detached-tables when minimizing and then restoring the application's main window</li> <li class="level1"> Corrected inversion bug in SD table update wizard</li> <li class="level1"> Added "tip in" correction table to direct access</li> </ul> </div> <h2>3.18.182 (5/24/2009)</h2> <div class="level2"> <ul> <li class="level1"> Adjusted GM 3-bar display routine to precisely match Delphi specification. This was actually a VERY minor change.</li> <li class="level1"> Made some design changes to support new device "plug in" modules coming later.</li> <li class="level1"> Made reboot/reconnect after direct access update much faster.</li> <li class="level1"> Added framework to application to support new SD features coming soon.</li> <li class="level1"> Fixed minor bugs in direct access display (like making color maps optional)</li> </ul> </div> <h2>3.18.116 (3/20/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added function to allow live cell highlighting of various direct access tables</li> <li class="level1"> Added function to detach various direct access tables from the application as floating windows.</li> <li class="level1"> Added ability to individually color graph legend items.</li> <li class="level1"> Slight change to BoostEst definition that may cause this item to disappear from your graph legend. Simply add it back using the Display Values dialog box if this happens.</li> <li class="level1"> Small adjustment to LC1WB display routine to improve accuracy</li> <li class="level1"> Added application version string to About box</li> <li class="level1"> Added a few help file pages for functions that will be available in future firmware upgrades. You can ignore these until the firmware upgrade is available. These pages include Speed Density, AuxMaps, and EGR.</li> </ul> </div> <h2>3.18.44 (1/12/2009)</h2> <div class="level2"> <ul> <li class="level1"> Improved the MAF adjustment helper - <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAFComp Adjust (CombinedFT)</a> </li> <li class="level1"> Added support for estimated HP and Torque for V1/V2 ECUs</li> <li class="level1"> Fixed bug in datalog export function where the running timestamp was being reported as RPM</li> </ul> </div> <h2>3.18.33 (1/1/2009)</h2> <div class="level2"> <ul> <li class="level1"> Added TPS adjustment helper - <a href="/wiki/doku.php?id=v3tpsadj" class="wikilink1" title="v3tpsadj">TPS Adjust</a></li> <li class="level1"> Added support for V2 ECUs and the <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAFComp Adjust (CombinedFT)</a> </li> </ul> </div> <h2>3.17.158 (12/30/2008)</h2> <div class="level2"> <ul> <li class="level1"> Fixed bug with reset LTFT function when used with a DSMLink (V2) ECU</li> <li class="level1"> Added V3 MAF Compensation global scalar "helper" to help auto center the MAF compensation table - <a href="/wiki/doku.php?id=v3mafadjcombft" class="wikilink1" title="v3mafadjcombft">MAF Adj: CombinedFT</a></li> <li class="level1"> Tweaked fuel calculator to provide an initial estimate of injector size and to allow for use of calculated global fuel adjustment</li> <li class="level1"> Added View menu items to edit ECU Config and DirectAccess data embedded in a datalog more easily</li> </ul> </div> <h2>3.17.154 (12/26/2008)</h2> <div class="level2"> <ul> <li class="level1"> Changed version number in about box (may require re-acceptance of license agreement)</li> <li class="level1"> Added some details to help file</li> <li class="level1"> Added reset of long term fuel trim ECU menu item</li> <li class="level1"> Added MAF adjustment "wizard" based on CombinedFT</li> <li class="level1"> Misc: added ClosedLoop, fixed 1G EGR log item, added 0.5 min-clip to AEM 3.5 and AEM 5-bar, added details to some direct access tabs</li> </ul> </div> <h2>3.17.142 (12/15/2008)</h2> <div class="level2"> <ul> <li class="level1"> Initial release</li> </ul> </div>